The centerpiece of the Poly-Rack System is the Poly-Racker, a unique one-piece polyethylene rack that holds two 55-gallon drums securely in place. A massive 100-plus gallon containment sump ensures spill safety even in worst-case drum leaks. The deep dispensing well easily holds 5-gallon pails while containing incidental spills and splashes in a ribbed bottom without contaminating the sump. Dispensing wells have a scalloped edge so pails can be easily removed. Two (2) drain plugs are standard. Poly-Rackers can be transported by forklift as separate pieces.

Poly-Racker - Product Number: 6000-YE

Dimensions: 49” L x 53” W x 22.88” H, 124.46 cm x 134.62 cm x 58.10 cm

Weight: 120 lbs. / 454 kg

Load Bearing Sump Capacity: 3000 lbs. / 1360.8 kg, 102 gal. / 386.1 liters

Regulations: EPA 40 CFR 264.175, SPCC and NPDES


Combine a single Poly-Stacker with a Poly-Racker to stack up to four drums. Add another Poly-Stacker and you have a storage system that holds six drums and is rated to hold 3,000 lbs UDL. Each Poly-Stacker holds two 55-gallon drums and can quickly be stacked with a forklift. Any spills from the second and third levels fall into the dispensing well for containment and easy clean-up. Combined, Poly-Racker and Poly-Stacker make up the most efficient drum storage and dispensing system you can buy.

Poly-Stacker - Product Number: 6002-YE

Dimensions: 49” L x 40.75” W x 12.75” H, 124.46 cm x 103.51 cm x 32.39 cm

Weight: 56 lbs. / 25.2 kg

Load Bearing Capacity UDL: 2400 lbs. / 1088.6 kg


Increase safety and productivity when you add the Poly-Shelf to your Poly-Rack System. It easily attaches to a Poly-Stacker and allows simultaneous dispensing from all drums. A hole in the bottom of the Poly-Shelf drains into the dispensing well in the Poly-Racker.

Poly-Shelf - Product Number: 6003-YE

Dimensions: 17” L x 22” W x 17.5” H, 43.18 cm x 55.88 cm x 44.45 cm

Weight: 10 lbs. / 4.5 kg

Load Bearing Capacity UDL: 60 lbs. / 27.2 kg


Note: Do not use plastic drums at load bearing levels.